AK Fast Fire Selector Procedure

[Binh]

From http://www.militaryphotos.net by el_kab0ng...

Step 1 - Starting Position


Step 2 - If you're right handed, use your left hand to reach under the trigger guard and place your fingers on the selector switch. (If you're left handed, none of these instructions apply.)


Step 3 - Using your fingers, pull down on the selector switch to engage. On select fire rifles, this could be to either position 1 or position 2 depending on the volume of fire needed.


Step 4 - Once the selector switch is engaged, tilt the rifle slightly to the right with your right hand and use the index finger of your left hand to hook the bolt carrier handle.


Step 5 - With a quick jerk, slide the bolt carrier towards your body and release once the carrier stops.


The point of this is that you don't have to remove your hand or leave the trigger, nor did the point of aim leave the target.

Thanks to komrad el_kab0ng

[zenTaurus]

uhummm . . . that seemed to be part of the old alakdan fast mag change vid, IIRC

nice find, kom binh wala bang saktong link?

[alakdan.net [aka 9th]]

AK Operations Instructions




komrad Binh ask me to repost this instruction