Kalash Reciever compatibility

[Blaze]

komrads, Compatible ba ang Kalash/DBoys AK Receiver sa Cyma CM.048???
I broke my receiver while playing last weekend eh.

[taonggubat]

waahh... can you post more details kung bakit nasira ang receiver mo?

hindi ko sure bro.. iba kasi design ng area kung saan sinisecure ang hop up chamber ng dalawa... mas mabuti hanap ka ng meron kalash, tas ipatry mo kung compatible.. madali lang naman ang dissasembly eh

[Blaze]

Nabagsak ko sa game komrad, yung sumalo ng bagsak yung Butt, so yung parang butas na kung saan naka screw yung butt nawala yung thread tpos medyo nabaluktot.

Pwede pa naman gamitin, pero hindi ko alam kung paano maaayos yung loose thread.

[pusswack]

paki post ng damage part komrad

[H a n s]

Meron 048 try ko sa Boyi balitaan kita komrad.

[Blaze]

Thanks komrad!

In the meanwhile I remedied it by putting a much longer screw na
tatagos sa butt, tpos nilagyan ko nlng ng nut. Ok naman for now.

[Anubis]

Hindi siya kasya brod.

Yung cyma cm 048 kasi is similar to inokatsu/ guarder wherein the hop chamber is attached to the outer barrel that goes all the way through the rear sight trunion.

on the other hand, the hop chamber of kalash is similar to vfc wherein it is attached to a sliding piece of plastic held in place by another L-shaped plastic.

based on what you have said, it appears that you plan to replace the receiver of your cm048 but retain your other parts which is basically evertything else.

if that is the case, mahihirapan ka kasi hindi papasok yung outer barrel ng cyma cm 048 mo sa receiver ng kalash.

ang outer barell ng cyma mahaba at sa dulo nya, yung pinapasok sa receiver, parang "tuning fork", may dalawang bakal na nakalawit na kabitan ng hop. pag pinapasok siya sa receiver, tagusan siya. On the other hand, yung outer barrel ng kalash parang real steel, walang nakalawit na bakal and hindi siya tumatagos sa rear sight trunion.

thus, bilog lang yung pinapasukan sa receiver ng kalash while yung sa cyma cm48 hindi siya bilog lang, para siyang may 2 gatla sa magkabilang gilid para makapasok yung kabitan ng hop.

anyway if your problem is just the loose screw on the rear receiver trunion, pwede mo naman siya maayos just by replacing the screw with a bigger one. ni hindi ka lalagpas sa bente pesos sa ganung mod.

[Anubis]

by the way, based on the facts presented, dahil sa bagsak, nagkaroon ng wobble yung buttstock?

instead of working on the metal part, derechohin mo lang siya and do not worry about it loosing its thread.

you can instead work on the wooden buttstock, pwede mo siya lagyan ng tacks para sumikit yung butas and basically yun na yung magiging kabitan ng screw, and the rear stock trunion will hold it just fine with or without a thread.

kung mapapansin mo sa mga lumang ak variants (may jg spets ako dati) ang thread talaga ay wala sa bakal kundi sa butt stock. so by doing the above-mentioned diy, makakabit mo na siya ng maayos.