| ● Mainpage ● Board Guidelines/Rules ● Help ● Search ● Members ● Calendar |
| Welcome Guest ( Log In | Register ) | Resend Validation Email |
|
|
| Lainezism |
Posted: February 27, 2009 07:22 pm
|
|
Group: Members Posts: 7 Joined: February 13, 2009 |
Komrads,newbie lang po ako d2 and im wondering kung anong advisable spetz parts ang kelangan ang upgrade at mga price quotations na rin po kung ppwede. Your response will be highly appreciated. Thanks in advance Komrads.
|
| taonggubat |
Posted: February 28, 2009 05:07 pm
|
![]() Group: Global Moderator Posts: 568 Joined: September 19, 2007 |
first of all.. what kind of upgrade?
power, ROF, accuracy or simply for durability.. also what fps range you want?..
|
| Lainezism |
Posted: March 12, 2009 12:41 pm
|
|
Group: Members Posts: 7 Joined: February 13, 2009 |
Cnsya na po for the late reply mga komrads, been busy preparing for the FAS North Luzon eliminations dahil kasali team namin but unfortunately we didn't make it. I'll go for the ROF and accuracy upgrades po sana mga komrads. Thanks a lot and more Kalashnikov followers to come!
|
| taonggubat |
Posted: March 12, 2009 12:53 pm
|
![]() Group: Global Moderator Posts: 568 Joined: September 19, 2007 |
for accuracy:
tight bore barrel.. preferably 6.03mm bore size, the longer the better hop up rubber/bucking - depends on your FPS, low fps = soft rubber (systema, classic army, guarder 50%); high fps = hard rubber (guarder 70%, prometheus hard) * if low fps(soft hop rubber) then SCS is a must or an H-hop nub.. heheheh for ROF, eto ginawa ko dati.. good piston with angle of engagement mod.. sp120 spring 11.1v 1200mAh battery di ko alam ang result pero mabilis yan.. pero to get more rate of fire, better use lower rated spring or high speed gears, deans plug connector, short stroking or high speed motor.... pero beware.. with a very high ROF baka mahirapan na ang magazine mo maghabol sa feeding kahit meron sector chip.. so misfeed will be an issue...
|
| Lainezism |
Posted: March 20, 2009 07:25 pm
|
|
Group: Members Posts: 7 Joined: February 13, 2009 |
With a little help from my gunsmith buddy, we were able to change the stock barrel into a much longer barrel (m4 barrel that is pero masyado mahaba kaya linagari namin, but he suggested that a supressor could hide that) then ung spring was SP-120 at pumalo po sa 427-439 fps @ .20. Temporary lang mga komrads pero not bad for a newbie gun. I've started canvassing for the parts given by komrad taonggubat and hopefully next month I could fully make the necessary upgrades. Thanks a lot komrad taonggubat. It's a great help for a newbie like me.
|
| dakling |
Posted: March 25, 2009 11:28 am
|
![]() Group: Members Posts: 54 Joined: June 11, 2008 |
master TG, magkno na mga tb ngaun? madbull chaka prome.
There are no secrets to success. It is the result of preparation, hard work, learning from failure. --Colin Powell-- |
| The End |
Posted: March 25, 2009 02:44 pm
|
![]() Group: Members Posts: 18 Joined: December 07, 2008 |
ang gamitin nyo edgi 6.0 tb..umabot ng 473fps aksu ko ... ganda pa ng groupings
"buti pa ang sisig may utak" |
| dakling |
Posted: March 25, 2009 06:00 pm
|
![]() Group: Members Posts: 54 Joined: June 11, 2008 |
i've researched and read about Edgi's TB and... well, i'll still go for the other brands. hehe. next time cgro, edgi na try ko.
There are no secrets to success. It is the result of preparation, hard work, learning from failure. --Colin Powell-- |
| taonggubat |
Posted: March 26, 2009 02:14 am
|
![]() Group: Global Moderator Posts: 568 Joined: September 19, 2007 |
ok naman ang EDGI barrel.. 2 years ko na nagamit yung una kong baril before ko pinalitan kasi nagbent nung nahampas ko AK ko malakas impact kaya nagbent yung outer barrel kasama inner barrel waaaaaaaahhh... pero ok na ngaun AK ko hahahah
until now EDGI pa rin gamit ko.. pero mahal na ang EDGI barrel ngaun di tulad nun 1.5k ang 510mm length.. ang price nya ngayon medyo malapit na sa price ng TN barrels.. mag TN kaya ako hahahah... kung madbull.. mura yan, makakakuha ka mga 900 to 1.2k petot..
|
|
|