JG "SVD DRAGUNOV" AKVD, Need help

Magandang araw po sa inyong lahat. Pano po ba remedyohan yung paggalaw ng hop up adjustment tuwing nag fufull auto sa ak? JG po ang brand nung ak47 tsaka "dragunov" kuno. Bago pa kasi tong mga to kaya medyo d pa napapanahong magpalit ng bagong hop up assembly. Meron po bang paraan para matigil yung paggalaw nung adjustment ng hop up pag nakafull auto? Maraming salamat po mga kapatid.

Lagyan mo ng washer komrad, a shims or washer of PC motherboard(Red Color)





Pwede mo din lagyan dito(arrow) komrad.


Hanapin ko muna ang image using PC mobo washer

Maraming salamat po sa mabilis na reply.... antayin ko po yung isa nyong picture. Subukan ko po yan. So, there's really no need for me to buy a metal hop chamber to eradicate the issue. Galing talaga ng mga pinoy. lahat nagagawan ng paraan.

No need, mas lalong gagalaw kung metal gamitin mo komrad.
Much better ang plastic

Btw....after setting the hop, you can tighten the lever screw para di na gagalaw.

Ayos na Komrad..... pinuto ko ng tig kalahating mag yung 2 ak ko... d nga gumalaw. Maraming salamat uli. I just got my "dragunov" yesterday at nasubukan agad sa laro. maganda accuracy at I was surprised nung chrono ko kasi pumalo ng 420 at .2 Kala ko kasi mga 330-350 lang to. Problema ko naman ngayon battery. May mga nakita akong pictures dito about using large battery and putting it on the stock... kay komrad alencore ata yun if I'm not mistaken. Now if I am going to do that, I have to look for wires to extend it para umabot sa likod nung receiver yung connector. Medyo umiikot pwet ko dito kakaisip e. siguro gawa na lang ako ng parang extension para pwede pa din ako gumamit nung stick type.

I have been looking at buying a longer inner barrel (650mm) but all they have here is the Madbull Black python. I am still hesitant of this brand since I have read several neagtive things about this like the black coating strips or comes off after several hundred rounds thus making it prone to jamming. Is there any truth in this? I dont want to buy this if it would just give me a hard time specially it's quite expensive (cheapest I could find is $45 shipped). I couldn't find a brass barrel (650mm). It's out of stock in most of the stores that I inquired. This leaves me two choices: Stick with the stock barrel or get the Madbull black python. My brother will be flying in to the states to visit me on April. I was wondering if he could buy it (brass barrel) there in the Philippines and just bring it here. Madami ba nagbebenta sa Manila? How much is the running price? I'm looking at at 6.04.

eeennnggg

I am using it for my RPK

(Note the metal hop chamber, made by SRC. Mas maganda pa ang plastic dito)
Anyway So far ok naman, no jamming occur 'til now.
Sobrang gaan, meaning can be aluminum eto, kakatakot nga lang dahil sa haba parang madaling madisalign.
Seldom use the gun, sooooooooo heavy.

good for photo ops only

Try EdGi
Unfortunately wala akong contact info sa kanya.
Try ko search....

Maraming salamat Komrad. Problema ko kasi is my brother is not into airsoft and does not really know anything about airsoft kaya nahihirapan ako magpabili sa kanya ng mga pyesa. Paano mo nga pala natanggal pinion gear ng motor mo? Nakita ko kasi sa picture e. Pinion gear removers here cost $60 shipped. Sinubukan ko vice grip at pukpok e d kayang matanggal e. Anyways, maraming salamat uli komrad. akoy papahinga na at 12:20 na ng hatinggabi dito. I'l check the forum as soon as I wake up.. mga 6 hours from now.

Better buy Pinion gear remover komrad, baka masira pa ang magnet at shafting kung pukpuk ang gamitin mo.

E komrad alakdan, d ko makita procedure mo nnung pag paganda ng plastic handguard nung ak mo. pano ba yun? ang nakita ko lang e yung sa wood. lilihain mo rin ba yung plastic? bago lagyan varnish? Brush lang yung sa varnish d ba?

Yeah, me too I can't find it.

• Scratch the plastic furni using bread knife, don't scratch different line, follow the grain of a real wood.
• Dent it using screw driver, make a natural dent as possible.
• Spray paint with a flat black, let it dry
• Then removed partially the paint using abrasive paper #300, you have to use your artistic talent here
• Clean it using water, wipe it dry and apply plastic varnish (mahogany or walnut) using a paintbrush with single stroke per layer. Two layer is enough.

That's my procedure, sometimes not

Yeah, me too I can't find it.

• Scratch the plastic furni using bread knife, don't scratch different line, follow the grain of a real wood.
• Dent it using screw driver, make a natural dent as possible.
• Spray paint with a flat black, let it dry
• Then removed partially the paint using abrasive paper #300, you have to use your artistic talent here
• Clean it using water, wipe it dry and apply plastic varnish (mahogany or walnut) using a paintbrush with single stroke per layer. Two layer is enough.

That's my procedure, sometimes not

OK ka talaga... dlang tech, artist pa! Nakabili na ako pintura at kung ano ano pa. Just got back from home depot kaya medyo nag iisip na ako kung ano uunahin kong gawin. hehehe iba talaga pag bored ka na. Anyways, pagnatapos ko tong mga to post ako -pictures para makahingi ng opinyon kung ano mali na ginawa ko Salamat uli komrad!

I just want to add the washer thingy

Forgot the generic term of this, i think this a phenolic paper/cardboard.
Seen usually inside electronics gadget or PC MoBo, act as insulation washer of PCB.


Can give more grip than the metal washer.

AMAZING! The hopup adjustment thingy doesn't slide anymore. Ayos!!! Komrad Alakdan, do you know anyone in the Quezon City area who sells LONG HICAP MAGAzine for jg ak's? I will be asking my brother to get me those so he can bring it here on April.

Try contact komrad Hans or komrad zT, they knows better than me for MM area