Your AK Internal Setup!

Post your complete internals upgrade, external included.

Model:
AKS74UN, "Nika", Cyma 035
Spring:
PDI 190
Spring Guide:
with Bearing(forgot the brand)
Piston Body:
CA Stock
Piston Head:
TechPro Double O-ring
Cylinder:
Stock
Cylinder Head:
Stock
Air Seal Nozzle:
Guarder Airseal Nozzle
Gears:
CA Stock Ratio Gears with Sector Chip
Shims and Bushings:
Systema Shims/TechPro Bushings
ARL:
Element
Motor:
Marui EG1000
Switch Includes Mosfet:
Stock with Mosfet
Hop up includes rubber/chamber:
Stock with Guarder rubber
Internal Barrel includes length/ID:
Stock
Battery:
11.1v Lipo
External:
N/A
FPS/RPS:
460fps, 440fps(settled)/15rps

You may use this code:

CODE

[B][COLOR=red]Model:[/COLOR][/B]

[B][COLOR=red]Spring:[/COLOR][/B]

[B][COLOR=red]Spring Guide:[/COLOR][/B]

[B][COLOR=red]Piston Body:[/COLOR][/B]

[B][COLOR=red]Piston Head:[/COLOR][/B]

[B][COLOR=red]Cylinder:[/COLOR][/B]

[B][COLOR=red]Cylinder Head:[/COLOR][/B]

[B][COLOR=red]Air Seal Nozzle:[/COLOR][/B]

[B][COLOR=red]Gears:[/COLOR][/B]

[B][COLOR=red]Shims and Bushings:[/COLOR][/B]

[B][COLOR=red]ARL:[/COLOR][/B]

[B][COLOR=red]Motor:[/COLOR][/B]

[B][COLOR=red]Switch Includes Mosfet:[/COLOR][/B]

[B][COLOR=red]Hop up includes rubber/chamber:[/COLOR][/B]

[B][COLOR=red]Internal Barrel includes length/ID:[/COLOR][/B]

[B][COLOR=red]Battery:[/COLOR][/B]

[B][COLOR=red]External:[/COLOR][/B]

[B][COLOR=red]FPS/RPS:[/COLOR][/B]

Model:
AKS74UN, "Maria", Cyma 035
Spring:
Used M120
Spring Guide:
Element With Bearing
Piston Body:
Stock
Piston Head:
Stock
Cylinder:
Stock
Cylinder Head:
Stock
Air Seal Nozzle:
Stocks
Gears:
Stocks
Shims and Bushings:
Systema Shims and Systema Bearing Bushing
ARL:
Stock
Motor:
Stock
Switch Includes Mosfet:
Stock
Hop up includes rubber/chamber:
Stock
Internal Barrel includes length/ID:
Stock
Battery:
11.1 volts Lipo
External:
N/A
FPS/RPS:
426fps, 410fps (settled)/