komrads ano po ba kailangan ko i-upgrade...target ko po is high ROF and 450-470FPS....
my AEG is AK47 CM036...

sp130 spring set up..

matched with a good piston body, battery, bearing spring guide and optional torque up or super torque up gearset...

with basic upgrade of course with metal bushings and proper shimming, sealing of all possible leaks.. could be in 450 to 470 fps range

or plan B heheh

pdi190 spring set up

pair it with a good piston body, bearing spring guide and of course metal bushings with proper shimming.. pair it with a 11.1v lipoly battery heheheh.. faster ROF than sp130 setup.. could be in the 440 to 460 fps range


BTW the cyma .036 is the AKM not AK47

TU and STU gears will only lower your ROF. Even with 11.1v battery its impossible.


Standard ratio gears, good motor and a very good quality PB.

komrad magkano naman po aabutin nun pdi190 setup?

I'm not familiar with the prices there sa atin.

Ask mo sila kom alakdan or komrad dragunov jc. Sila mga astig dyan.

hehehe....

wala akong update sa price ngayon

Try ko ask mamaya matapos lahat back log ko.

actually you could still have a high speed set-up on TU or STU gears (wag lang infinites). pair it with a high speed motor (Systema Turbo, CA High Speed, G&P 120) or have your stock motor rewinded -- our resident rewinder sa team found out that you can crank out more RPS on a rewound high torque motor than after market highspeed motors, except maybe the Systema Turbo, ibang level na yun.

Suggestion ko sa set-up (tipid)
STU
SP130 or PDI190%
TechPro Piston body (metal teeth)
JG Silver Magnet (rewinded)
Mosfet

don't put too much spacers on the spring (ie spring guide w/ bearing & piston head w/ bearing). this would only slow the set-up down.

try mo muna yan komrad tapos update sa RPS pati FPS.

yan si komrad bangus, expert yan sa "very" high speed setup(25~35rps)


ako kuntento lang sa 16rps using sp120 or pdi190

asus... pag naka tapak ng 25rps yang RPK mo, malamang gagawin mo ring "very" high rof ang lahat ng baril mo!!

baka makatulong po ng konti..


PDI-190 - 800
bushing - 400 - 500
shims - 100 - 150

komrad set up ko sa Cyma SLR ko:

pdi 190
spring guide with bearing
metal bushings
jg black motor (stock)
2150 mah na li polly
atu gears

460fps@.25

hope this helps

komrad,

Balita?

thanks po mga komrads....
baka po next month update ko na kung anong status ng beng beng ko hehehe....
thanks po ulit...