SCS - concave spacer

QUOTE (malloski @ August 05, 2008 01:41 am)

... sorry Komrad trebor ...

by the way... how do we delete a post? can't find the delete button. ???

For forum security feature, you can't komrad.

Sorry for that, check this: http://filakairsoft.30.forumer.com/index.p...f=17&t=785&st=0

Rgds
FilAK

QUOTE (taonggubat @ August 05, 2008 05:37 pm)

guarder 70% hop rubber gamit ko.. parang di ko mafeel ang effect nya eh

same with my non-AK

heheh.. now i know.. nung nagpalit ako ng hop rubber from systema to guarder 70% nawasak accuracy ko ehehe.. kala ko ibreak in lang, hanggang ngaun ganun pa din hehe..

ask ko muna mga master kung ok ang systema sa 450fps and above na set-up.. kung ok sya magpapalit ako ASAP sa systema and a new tightbore barrel.. EDGI or Madbull depende sa budget

Ok! So let me get this straight? Bale mag wo work lng ang scs sa hop up bucking kng ito ay walang bukol or protrusion sa loob?

Greetings Komrads,

Have you ever wondered why there's a need to have thick hop-up rubbers for high FPS setups and kung bakit may bukol sa loob?

The reason is... thick hop-up rubber provides better air compression and air leaks will be reduced or eliminated. Regarding sa "bukol" kung bakit meron... the "bukol" is there to make the hop rubber contact the bb surface using the hop dial and spacer/nub/cushion. Since made of rubber/silicone material ang hop spacer/cushion/nub, hindi nya maitutulak ang hop rubber to make contact with the bb surface dahil malambot lang sya and that is why may "bukol" sya to compensate for the push of the hop spacer/cushion/nub.

Sana ang mga airsoft companies should have made their hop rubbers thick all around except the portion kung saan nakapatong ang spacer/nub/cushion. D sila particular sa accuracy and groupings cguro or wala silang paki kung pangit ang accuracy at groupings ng bb's.

I am very proud and happy that I was able to perfect the SCS. I have made all possible shapes and sizes before and so far the concave shape of the SCS outperforms all of them. Sino sa inyo may extra hop rubber na makapal with the "bukol" and willing to experiment on it? Eto gawin nyo... turn the hop rubber inside out exposing the "bukol" tapos lihain nyo using #400 rit sandpaper until level na sya. A metal file would be better for this. After you remove the bukol, place it back to its original position and file/sand the portion kung saan nakapatong ang spaver/nub/cushion. TAKE NOTE! Ang portion lang ng hop rubber kung saan nakapatong ang hop spacer/nub/cushion. After you finish doing this, put the hop assembly back and lagay nyo ang SCS with silicone oil/grease on it. Hehehe... Paki update nlang pagkatapos kung ano ang effect k.

I would thought so. Because, i have never seen a hop up bucking with no protrusion on the inside.

I don't have scs with me yet as im here in the US. But, i will definitely try and experiment with it as soon as St.Elmo send me my orders.

@shredder you got PM!

QUOTE (Shredder @ July 31, 2008 05:28 pm)

Greetings Komrads in Arms!

@Komrad zenTaurus - Thanks for welcoming me here! filakairsoft/aprub.gif

I have been following this thread for quite some time already. Medyo nahiya lng ako mag register d2 sa forum because I don't have an AK yet.

I'm planning to buy in the future pero ipon mode muna for more equipment and other stuff. Hehehe...

@komrad bangus - Try mo rin ang SCS and compare it to the H-hop k.

@Bro's/komrads malloski, Alencore, st_elmo and jdvaldez - Hello!

Hehe welcome to the club Faps!!!

Sensya na ngayon lang me naka pasyal dine hehe kukulit kasi sa kabila LOL!

Sold out na mga SCS ko dine hehe!

my SCS works best with Systema hop bucking..

i have a systema hop bucking with SCS, muzzle velocity is 430fps on .20g BB

superb accuracy.. matched with an EDGI 6.03mm id 500mm length barrel

changed my spring to sp130, muzzle velocity is now 480fps..

changed my hop bucking to guarder 70%.. used .23g BB

its pretty accurate, but systema bucking has better accuracy since its softer

QUOTE (Shredder @ August 07, 2008 08:59 pm)

Eto gawin nyo... turn the hop rubber inside out exposing the "bukol" tapos lihain nyo using #400 rit sandpaper until level na sya. A metal file would be better for this. After you remove the bukol, place it back to its original position and file/sand the portion kung saan nakapatong ang spaver/nub/cushion. TAKE NOTE! Ang portion lang ng hop rubber kung saan nakapatong ang hop spacer/nub/cushion. After you finish doing this, put the hop assembly back and lagay nyo ang SCS with silicone oil/grease on it. Hehehe... Paki update nlang pagkatapos kung ano ang effect k.

medyo confused me

mga bucking i've seen so far ay nakaindent paloob ung "hump" -- meaning, sing nipis sya halos ng buong bucking.

you're referring only to those types na solid ung hump, kom shredder?

or are you seying na tanggalin ung hump?

may mga reklamo pala ibang scs user's na di daw effective. well it's a hop up enhancement so it must be done by an expert.
although i make it point i'm the one installing it unfortunately some people
just can't bring their gun so bahala na sila hehe.

komrad,

Available na rin yun Element Brand ng H-Hop for 150 to 250 dalawa agad.

Mine was made and installed by Komrad Alencore and it works very well.
My groupings are great. I'm using a Red Hop Rubber by Madbull.

On the other hand, I also installed an SCS to my CA M4 and the result
speaks for itself. Better groupings, increased FPS. I used Madbull Black rubber.

anybody else tried shark?

my bad komrad SORRY got mix up with our buttons..

QUOTE (Shredder @ August 05, 2008 04:42 pm)

Good afternoon mga Komrads and thank you for welcoming me here.

@komrad trebor - Pasensya lang about the pricing. The price before is different now dahil may overhead expenses na ako. Noon kasi libre lang lahat (kuryente, lugar, pamasahe, atbp) dahil nasa kwarto lang ako.

@All - Sa halaga na P250-P300, hindi kayo lugi dyan. Some of my clients even say na ang mura ng SCS considering its ability and practicality. It is hand made, made of high quality material and will last "forever". I personally am the one who makes them para sigurado na walang sabit. I can GUARANTEE that the SCS will do its job provided that the hop rubber used is compatible (no bukol inside and should be of the soft type).

Maraming salamat and have a very nice day! God Bless...

Ricky

@Shredder, dito ka na rin pala.

Komrads, ngayon lang ako nagawi uli dito e. Ang kukulit nga kasi sa kabila. Pag nalingat ka ang dami mo nang naiwan. Parang huli ka lagi sa balita. Si komrad malloski may kasalanan nyan e. Ginagawang chatroom yung thread. Hehe.

By the way, I use SRC hop rubbers sa SCS ko. Maganda naman effect. Sa G&G na stock hop rubber na -try ko na rin i-install. Ganda ng groupings. Hanep! Napanganga ako! filakairsoft/clap.gif

komrad Zen,

Madbull??? tried the black color hindi ko nagustuhan lipad pero yun knob kasama maganda sya.