Full Version : New CYMA AKM (CM048M)
filakairsoft >>News! >>New CYMA AKM (CM048M)


<< Prev | Next >>

freedom_fighter- 02-08-2009
Ayan komrad, a much closer look. Hanggang jan lang muna, tsaka na yung internals pag napagsawaan ko na stock performance nya, stock pa lang naman astig na eh!

alakdan.net [aka 9th]- 02-08-2009
Tumatagal, gumaganda ang external/internal ng CYMA filakairsoft/clap.gif

Thanks for posting komrad freedom_fighter filakairsoft/aprub.gif

freedom_fighter- 02-11-2009
I found this review of the CM048M, it was originally in Polish then had translated by google. Eto lumabas, bahala na kayo umintindi, hehe... biggrin.gif

"CM.048M [CM] - is a replica AKM
Messages taken at the acute counterpart
The replica is a faithful copy of CM.048M karabinka AKM (awtomat Kałasznikow Modernizirowannyj). In 1956 began series production karabinka modernized AK47 under the name of AKM. AKM (same as AK47) is samoczynno-samopowtarzalną weapons. The principle of operation based on the evacuation of the gas by the side hole prochowych Lufy, with a long movement of the piston gas. AKM fires from a closed lock. Power is nabojowych magazynków with 30 rounds 7.62 mm x 39 mm.
The main changes in the structure (in relation to the AK 47) were:
- Back pressed to the castle chambers,
- A simplified method of attachment Lufy (peg top, instead of using screw connections)
- Shaped bed, adding chwytne performances,
- The lid of the chamber was modernized by adding three przetłoczenia castle (the aim was to increase the stiffness of the cover),
- Modernized trigger (added retardant reduces the cock when the fire spreads continued)
- Minimizing the weight suwadła,
- A new bagnetu,
- A mechanism for re-modernize, the pipes and the gas chamber,
- The so-called modernized device outlet. flashider.

The creation of so-called diminutive. AKMS flask equipped with a composite. In subsequent years, AKM has become the primary weapons of a long individual former Soviet Army. The production license of the gun running in most countries of the former Warsaw Pact (in Poland in 1965 as a 7, 62 mm carbine AKM and AKMS).

The new 048 is actually a replica of a replica of the best-AKM and what is on offer!
Corps, the silencer of flame, the lid lock, a gas pipe was constructed of steel, other elements such as the outer barrel, the muszki, elbow gas szczerbinki base, cast the bed side rail, and the ramrod celownicze instruments were also made of metal (ZnAl).
Pistol grip is made of nylon, magazine is made of ABS-u. Bed and the flask is made of wood Plywood - nice to see them!. In our gallery we have a statement from a real CM.048 AKM-em which was converted to a replica of ASG.
All parts of which are in strict peg top AK, in reply, are embedded in the wheels.

Very good performance of the exterior goes hand in hand with a completely new mechanism.
Hop up chamber is metal, and the same mechanism is a new reinforced with steel skeleton gb ślizgowymi 7mm bearings, reinforced steel gear, directional head piston which raises the efficiency of the entire mechanism. Spring 125 m / s installed in a space plus aluminum sleeve that is causing more tension springs which moves to the larger power shot for this model, 430 fps). Reinforced spring guide with łożyskowaniem which makes work easier and gives a number of springs s Fps more.

We tested a spring mechanism to 130 m / s which gave us 455 FPS at 30 thousand balls a mechanism re-opened and there was no trace of wear almost!

In addition, all parts and accessories of other manufacturers are fully compatible with this model, which is of vital importance in strengthening and improving the performance of the reply.

The set contains a replica of magazines, including hi-cap type with a capacity of 525 balls covered by 12 month warranty. Rechargeable Ni-MH 8.4 V, with a capacity of 1200 mAh and the charger.
NOTE!
Batteries have become capacity of 1400 mAh, checked batteries and almost 100 of their actual capacity to 1200 mAh ....

Any review of the AEG passes zero, as evidenced by stickery to gear boxach!"

freedom_fighter- 02-11-2009
Komrads, based on your experiences with models preceding the CM048, do you think it's safe to put sp140 or higher spring in the CM048 without changing any other parts but with re-shimming and re-greasing the gearbox?

The goal is to get the maximum FPS out of the gun without compromising durability (at least not too much decrease in durability).

alakdan.net [aka 9th]- 02-11-2009
hehehe... laugh.gif

Felix- 02-12-2009
Now it is no use buying an INOKATSU for 2,5 times an ACM AEG
It is a nice replica , i thing JG is on the way to issue also same wooden laminated ansd steel AK for those to come

taonggubat- 02-12-2009
nooo!!

sp140 is too much... youre going to kill your motor you need to replace the stock gear to a higher gear ratio like STU gearset

stick to the limit which is an sp130 spring.. reshim, regrease, reseal leaks, adjust angle of engagement if necessary, change hop up rubber if necessary, break in the motor and gears.... and youre good to go laugh.gif


alakdan.net [aka 9th]- 02-12-2009
how can you play with your friend using sp140....hehehe

freedom_fighter- 02-12-2009
Gusto ko lang naman malaman ang extent ng full capacity ng stock CYMA AK, wala po ako plano manakit ng kalaro. tongue.gif

I just want to maximize the efficiency of the gun. Based on what I've read kasi yung stock springs ng china AEGs ay madali mag-settle and malaki ibinababa ng strength. So I'm trying to find out what to replace the stock spring with after I wear it out. Para na rin mapag-ipunan na kaagad. biggrin.gif

alakdan.net [aka 9th]- 02-12-2009
QUOTE (freedom_fighter @ February 13, 2009 08:16 am)
wala po ako plano manakit ng kalaro. tongue.gif

filakairsoft/icon_t_lol.gif


taonggubat- 02-12-2009
what im saying is that, stick to the usual limit of sp130 spring for the stock gearbox without replacing anything..

it can handle an sp140 but you need to replace vital parts like the gear set...

Alencore Rambo- 02-14-2009
sp130 na lang tapos alisin lahat ng spacers lalu na yung sa loob ng piston body which btw ang hirap alisin kung same pa rin yung nakalagay hehe.
seal it properly and hopefully it will have an fps of around 430-450.

after a month pwede ka na mag bearing on both ends ng spring hehe.

Alencore Rambo- 02-14-2009
QUOTE (freedom_fighter @ February 09, 2009 08:32 am)
user posted image

user posted image

user posted image

user posted image

user posted image


tnx for pics. parang dboyz/kalash na rin hehe.

RatelZA- 02-19-2009
Would you guys say this is worth the money? Or should I wait for Kalash to release an RK06S full steel and laminated wood?

AH screw this... I'll get both!!!!

trebor- 02-19-2009
mejo namahalan ako sa presyo nito. tapos mejo a little wobbly yung butt stock compared sa kalash ko na folding butt ko. although mas ok yung wood nya and yung hop chamber nya. pero antay ko na lang yung cyma blowback AK sabi sakin ng frend kong seller parating na. sana nga lang indi ganyan kamahal, kasi yung cyma mp5 blowback indi umabot ng 7k.

Forumer™ is Voted #1 Free Forum Hosting provider
Build your own community today with the largest message board hosting company.