this one is sweet.... yay...

need to save again..

hmmm....

i smell PKM

matagal pa ba to?

http://www.taiwangun.com/shop,show,1639

CM.051 [CM]
Weight 4200g
Hi-cap magazine 750 balls
Battery Type Mini Cubes
Gearbox v.3
Length 107 cm
Speed 430fps
Ext Barrel length (mm) 640 mm
Adjustable Hop-Up
Type a single and continuous fire
Material metal + wood
Body material steel
Description:

CM.051 [CM]

First in the world to present the latest model CM.051 which is a replica of hand-held machine gun RPK74. Production has been prepared in cooperation with our company. As a "base" to build a replica was used legally on the market of the severe rkm-a and drawings available to allow proper zwymiarować parts such as barrel or chamber outside the castle. Adding to this "working" slide and return the device get rkm which will satisfy even the most "geeks" Russian arms!

CM.051 is a replica made of metal. Body, muffler flames, cover lock, gas pipe, Bipod were made of steel, other elements such as the outer barrel, slide, the device returns, flies base, elbow gas szczerbinki base, cast the bed side rail, cleaning rod and targeting devices were made also made of metal (ZnAl).
Pistol grip is made of polymer, the magazine is made of ABS. Bed, the front-end to pipe the gas and the flask is made of wood Plywood, as in the sharp equivalent.
All parts requiring dowelling as in real-RPK and the reply was zakołkowane.
Very good performance of the external goes hand in hand with a well-known working mechanism has a replica of the earlier models (CM.048, CM.040).
Hop up chamber is made of metal, and the mechanism of a new reinforced with steel skeleton gb 7mm plain bearings, reinforced steel racks, directional piston head that raises the efficiency of the entire mechanism. Spring 125 m / s in the crowd, plus mounted aluminum sleeve which causes more tension springs which moves to a more powerful shot when the model 430 Fps). Reinforced spring guide with bearings which causes the spring to work easier and gives a few more FPS-s.
Mechanism has already been tested at CM.048 spring 130 m / s which gave us about 460 FPS with such a long inner barrel, after 30 thousand beads otwarliśmy back mechanism and there was hardly a trace of wear!

It is worth noting that all the parts and accessories from other manufacturers are fully compatible with this model, which is of vital importance in strengthening and improving the performance of the reply.

The system includes a replica of the magazine along with the type hi-cap with a capacity of 750 balls included 12 month warranty. Ni-MH 9.6 V with a capacity of 1200 mAh battery and charger.

Any review of the AEG passes zero!
Is checked and przestrzeliwany on XCORTECH x3200's chronometrze

Messages taken from the Internet on RPK 74 --- In the second half of the twentieth century to the 70 arms of the Soviet Army introduced a new assault rifle AK-74 caliber 5.45 mm. At the same time the weapon was introduced to complement it with rkm RPK-74. It was a derivative of the AK-74 equipped with a long barrel and Bipod.
RPK-74 was powered from plus 45 magazines nabojowych arc. Rkm emergency can be supplied with 30 magazines nabojowych AK-74 rifle, but this reduces the practical rate of fire.

RPK-74 is still the country arising from armed army after the collapse of the Soviet Union. Was also a stock of arms of the Polish Army and was used in pododdziałach armed with rifles 5.45 mm wz. 88 Tantalum. The arms of the Polish Army was withdrawn in the early twenty-first century with a rifle wz. 88.

This confirms it's existence! Now to get hold of mine!

Now for the LOOONNG wait

pos pics post pics if you've got it

It is going to be a while... have to wait for it to become available or for M76 to get stock. I prefer to get it from M76, that will be beginning of next year.... thats what I meant by Long wait.

But yes! Will post pictures once I have it in my clutches!

EDIT:

I found some more info on the gun:
CYMA CM051 RPK74:

Read this link: Link

Seems like for now only Taiwangun will sell it. But that will change! Hopefully! It is a tad expensive at the moment.

i think im going to wait

gonna buy next year...

very nice!
saw an rpk at bodega divi but the box was looks worn out and it ain't full metal
according to the poor sales lady who looked so tired well that place is so hot sometimes
reason i didn't bother her to take out the box to inspect it further.

Hala baka guarder rpk kit yon komrad....

RPK ordered today , i will fit my Russain RS woods

ahhh..

It is strange , it has been issued some weeks ago now and before teh fist shortage now refilled and no review done ? It recalls me the CYMA AIMS
So mine has arrived , review in progress here

http://super.felix.free.fr/forum/posting.p...editpost&p=7751

I am still customizing it with RS Laminated HG and fixed stock . The gearbox has a lined windows like those on earlier Blow back CYMAs ( AIMS) but the piston block can not be used as BB system unless we change it

Awesome RPK,
Details better than my inok kit except the finish paint.
Please let me know if it is a single piece outer barrel.

Correct Link!