yung ang original plan ko kaso super hirap kikilan yung epoxy kung sa mismong mag well dikitan kasi dapat matibay na matibay pagkadikit at maganda hugis ang epoxy or else kakalas pa rin yung front mag catch...so experimented on this one muna...other concern is will the modded mag would fit on other ak's well ok naman ganda nga ng fit sa CA slr ko hehe.

ah ok, what i thought baka di magkasya sa ibang baril ang magz mod.
thanks kom alen.

upon solving the mag fit issues, this ak is back to no.1 on my list hehe.

komrade Alencore Rambo,

Do you think this gun can handle a m140-m150 spring without any up grades.

hmmm...stock gears and piston body is the primary concern for those springs.
one way to find out if those stock parts can handle a sp150 spring is simply try it hehe...anyone?

Even if it has steel bushings , putting an M140 - 150 spring is not playable and you may broke your gearbox
I have replaced quite all my AK with ELEMENT M105 ST spring , it is enough

Thank you comrades.

Do yall know if there is a AKM stock adapter?

ehem...not really. based on my experience the stock gb's on most acm ak's are much much more tougher than you think plus the fact version 3 gb are known for being a lot sturdier
no matter what brand though my CA v3 gb is still in good shape
since 2006 that was set-up for sp120 to sp140 to sp170 (that's not a typo hehe) and now, sp150.

my jg ak's stock gb's since 2007 still in good shape as well using an sp130 spring
though i downgraded it for cqb games at 450 fps limits using a stock spring from an
ank m4 hehe.

I received mine a few weeks ago. Had some issues with the rivets not being properly riveted, thus it caused wobble. I fixed it with some Q-Bond and now the body has no wobble anywhere! I replaced the spring with one out of a JG V3 Mechbox and I also reshimmed, cleaned and relubed the mechbox. This gun is my new favourite! It runs smoother than my kalash Rk03 and quieter.
To my surprise the iron sights were already on target when I took the gun out of the box.
Had my first game with it this weekend and it surpassed my expectations!

GO CYMA!!!!

costs around 6.7k or higher

no problem on the gearbox with that spring heheh, a v3 gearbox can take a lot of punishment.. just avoid dry fires

the only problem whatsoever is the stock piston and the gearset.. also the stock motor will take all the strain because of the stock gearset.. with that spring, the stock gearset must be replaced with a super torque up gearset being the minimum..

also the stock hop rubber must also be replaced to match the velocity of the spring.. a harder hop rubber is recommended for stiffer springs like m140

Ganda talaga nang gun na to. Solid talaga ung feel and looks nya. Stock chrono ko is 435-445fps, nung pinalitan ko nozzle and cylinder and some washers = 485-495fps na using stock spring.

Ilang fps+ pa kaya pag nag 6.03 edgi ako?

And another question po mga komrads, gusto ko po kasing mag SP130 and STU, tapos papalitan ko po ung piston body nang df-halfteeth. Kaso dko po matangal ung piston head nya. Pano po ba inaalis ung piston head neto? May screw xia sa harap tapos sa loob may parang bakal lang na wala namang pag kakapitan nang screw driver, kaya ang hirap i ikot. Ayoko na po kase gamitin ung Systema aluminum piston head ko, -20fps ung nakuha ko don. Ganda ung piston head netong 048m that's why I want to use it tlga.

Thanks po!!

kalikot lang yan sa loob... mahirap talaga tangalin yan hehe..

i think square shape nut ang nasa loob.. if yes, gamitan mo flat head screwdriver yung malaki ang ulo at ipasok mo.. kontrahin mo sa pagikot ang nut while at the same time ikutin mo yung screw nya sa taas

haha nice komrad thanks! Ganda kase talaga netong piston head nya dko na papalitan to hangat hindi mawasak. Ung piston body lang tlga gusto ko palitang nang metal teeth