Cyma CM-048m AKM - mini review

ganyan talaga ang CYMA... marami nagkakagusto sa power nito out of the box.. so talagang tataas ang price nyan..

but for a stamped steel receiver and laminated plywood furnitures also a 7mm gearbox and a metal hop up chamber.. im sure panalo na kahit mga 7k pa yan

QUOTE (M76 @ April 19, 2009 01:33 pm)

have a look at the back part of the cocking leveler there is a hole and a small channel for some type of rod to fit , i will post the my pictures of the CM040d later but back to the present reveiw , great great . filakairsoft/clap.gif

I am so happy to see cyma and kalash are stepping up to the plate in there product range .... it is only good for the palyers filakairsoft/board_yu.gif

pls do post the pic concerning that komrad M76 I'm a little bit intruige hehe.

QUOTE (H a n s @ April 21, 2009 02:37 pm)

masta rambo,

Very nice review komrad.

Tnx Masta Hans!!! hehe.

QUOTE (alakdan @ April 19, 2009 03:42 pm)

and same as the cm047C or the vfc gearbox with slot for bb rod.
well, you can use that hole to peep inside if spring is in rest position

ayun ganun pala hehe tnx Fafi Jojo!

QUOTE (Felix @ April 19, 2009 05:20 pm)

Amazing pictures of the (inside ) receiver , well built , thick and strong steel
Now for the price of an INO/LCT receiver we can get quite the whole AK thanks to CYMA
Is the front sight visor made of steel?

user posted image

Their laminated wood is strange even the wood used do not seem to be in nice quality , something wrong ( not compared with RS ones )

sticking a little magnet of komrad Angel there confirms it ain't steel...it's simply pot metal.
well all metal parts except the main frame of the receiver is made of stamp steel.

QUOTE (morissette @ April 26, 2009 10:39 am)

mga komrad ano po masasabi nyo dito sa gun nato?

mag kano po ang presyo nito nung bumili kayo?

dito po kc samen sobrang mahal e.. mangingikil kc

7500 to kay brojames negotiable pa kung stock form pa pero kung yung finetuned
ang kunin hehe ala na tawad as one lucky komrad bought it already last friday hehe.

Update.....
After finetunning it, now it clocks an average of 480 fps at zero hop using .2
450 fps na rin nung di pa na finetune.

Finetunning includes...
- sealing all possible leaks from hop up to cylinder head.
- re-align hop nub...sometimes this ain't properly align and with cyma's new akm that's the case again though not severly mis-align.
- re-shimmed it as good as I can possibly can since the stock shimming is simply terrible.
- wifed off the stock grease and re-greased it using proper lubricants especially for the gears and cylinder, etc etc.
- applied the corner cut technique.
- 2nd tooth of stock pb now shaved...it is now safer to use it for hi rof gunning hehe.
- aoe....checked!
- some few more tweaks to squeeze out some more fps out of the spring hehe.

Will post some few more pics and fps vid of it later.

QUOTE (Alencore Rambo @ April 26, 2009 04:36 pm)

QUOTE (morissette @ April 26, 2009 10:39 am)

mga komrad ano po masasabi nyo dito sa gun nato?

mag kano po ang presyo nito nung bumili kayo?

dito po kc samen sobrang mahal e.. mangingikil kc

7500 to kay brojames negotiable pa kung stock form pa pero kung yung finetuned
ang kunin hehe ala na tawad as one lucky komrad bought it already last friday hehe.

Update.....
After finetunning it, now it clocks an average of 480 fps at zero hop using .2
450 fps na rin nung di pa na finetune.

Finetunning includes...
- sealing all possible leaks from hop up to cylinder head.
- re-align hop nub...sometimes this ain't properly align and with cyma's new akm that's the case again though not severly mis-align.
- re-shimmed it as good as I can possibly can since the stock shimming is simply terrible.
- wifed off the stock grease and re-greased it using proper lubricants especially for the gears and cylinder, etc etc.
- applied the corner cut technique.
- 2nd tooth of stock pb now shaved...it is now safer to use it for hi rof gunning hehe.
- aoe....checked!
- some few more tweaks to squeeze out some more fps out of the spring hehe.

Will post some few more pics and fps vid of it later.

thank you komrad!

love you!

Update.....
After finetunning it, now it clocks an average of 480 fps at zero hop using .2
450 fps na rin nung di pa na finetune.
Check it out here...
http://www.youtube.com/watch?v=uxj2-C33xco

Some few more pics...
user posted image

Finetunning includes...
- sealing all possible leaks from hop up to cylinder head.

- re-align hop nub...sometimes this ain't properly align and with cyma's new akm that's the case again though not severly mis-align.

- re-shimmed it as good as I can possibly can since the stock shimming is simply terrible.

- wifed off the stock grease and re-greased it using proper lubricants especially for the gears and cylinder, etc etc.
user posted image

- applied the corner cut technique.
user posted image

- 2nd tooth of stock pb now shaved...now ready for some hi rof gunning hehe.
- aoe....checked!
user posted image

- some few more tweaks to squeeze out some more fps out of the spring hehe.
http://www.youtube.com/watch?v=uxj2-C33xco

the freedom fighter at brojames hehe...
user posted image

uy my dalang akm yung mama oohh habang window shoppping ire hehe.
(sa tabi lang ng shop ni brojames to ha baka isipin nyo jologs me hehe.)
user posted image

komrad allencore okey lang po ba kung hindi naka finetuned?

kc newbie lang ako sa airsoft e.. ni mag bukas nga hindi ko kaya..

don't worry komrad kahit di pa sya naka-finetune ok pa rin yan.
wag lang muna gamitan ng lipoly or any stronger batts with higher voltage.

QUOTE (Alencore Rambo @ April 26, 2009 09:48 pm)

(sa tabi lang ng shop ni brojames to ha baka isipin nyo jologs me hehe.)
user posted image

kom.. mukha kang somalian rebel.. heeheheh

shopping with an AKM

hahaha....somalian na ng window shopping

hehehe...di naman ako negro ah hehehehe.

mali...yemeni pala

very nice review komrad alencore..