so misfit lang probly ang mag -- hayy, bad QC sa packaging

to fix that, you can either shave the catch on the mag or the lock lever -- your choice.

you can also, btw, make sure that the mag does not wobble by adding one or two layers of foam tape on the forward lip of the mag.

komrad... i had my 130 installed and used 9.6v 2000mah nimh no problems and definitely increased fps compared to stock.
last week, i used firefox lipoly chicklet type 11.1v. there were missfeed issues due to high ROF.. so i installed a sector chip. problem right now is that it decreased FPS... what seems to be the problem??

i also checked for leaks in the hop assembly and found none.

i know its compression issue. but cylinder head is properly sealed.

m thinking of the tappet plate.... am i correct??

tnx mga koms!

mga koms.. problem solved already.. i just changed my sector chip design to what like kom alakdan did.. i think its a KA sector chip design... hehehhe

apologies, komrad, for missing your 2nd to the last post. eniwey, happy for you na you've solved the problem on your own.

however, the sector chip/fps connection is quite a nosebleeder for me

probably there was such a delay on my first sector chip design that the nozzle and the hop assembly was not perfectly sealed. Before the tappet plate returns to its normal position the piston already slams thus compression loss...

ok. got it.

mga komrad, pwede ba na yung metal body cyma na may folding stock lagyan ng JG tactical na front assembly? minimal mods lang ba to?

probly a bit of shaving to make them fit well. you know how ACM qc is,