Battery Help

Im currently using 8.4 Shuangbao 1500 mAh NiCD (large plug) for my Spetz. I decided to upgrade my battery to (DIY) 9.6v 2200 mAh NiMh (small plug). I made an adapter (Large female > Small male) para I can switch batteries anytime by just removing the adapter. Problem is ayaw nya pumutok ng full-auto, pag naka- connect sa fuse assembly. Another thing, umiinit yung maliit na Fusebox. Pag nag bypass ako sa fuse assembly & directly connect the battery - OK naman.

Did I miss anything?!?

Questions:

1. What are the possible risks involved if I completely remove fuse assembly & just make an extension?
2. Should I remove the adapter & make a new fuse assembly for the new battery? Kasi parang hassle kung magpapalit ako ng fuse assembly + battery during the game (just in case mag lowbat ako bigla)


Although kaya i crank ng 8.4v na battery yung spring- I wanted to have a faster ROF.

My upgrades for now:
Systema Metal SpringGuide w/ bearing
Systema Piston head w/ bearing
Systema Metal bushing & shims
Oversized O ring
SP120 Spring

Help naman mga komrads! Thanks!

Thanks to Komrad Malloski's upgrade guide! found here http://www.filairsoft.com/forum/showthread...?t=11882&page=4

Take off the fuse. Make sure your wires are in perfect condition.

Thanks Komrad!

Wala ba akong future issues just in-case tanggalin ko yung fuse? Like burning the motor?

or blowing up the battery in the butt?!?

ayoko pumanaw sa gamesite

Well, there's no cases na nicad/nimh battery exploded dahil sa short circuit sa AK.
But if you hesitant to take out the fuse, just make sure you have a 100% good fuse holder or solder it directly.
Or install a Polyfuse.

Problem with extra connection is resistance and this means power loss sa battery.. now kung san umiinit dun ang power loss..

I followed Komrad Moky's advise to just remove the fuse... So, what I did is just made a straight connection.

Tested the gun a few times & checked the wirings for signs of heat or burnt smell...
OK naman - my Spetz is ready for action.

Thanks for the help komrads!

Im also thinking of following Komrad Malloski's advise in installing a Mosfet switch.. if budget permits

mosfets are !

may i ask what a Polyfuse is, komrad alakdan? brand? type? pic?

Im not sure. But. i think they are the resettable ones. Correct me if im wrong.