Back to Classics


Not too late little review of Cyma CM.042 Standard Fixed Stock Full Metal and Real wood AK-47.

Package content:
• Standard Fixed Stock Full Metal and Real Wood AK-47.
• 600 rounds High Capacity Magazine
• CM 8.4v 1400mAH 2/3A Ni-MH Battery
• Conventional Battery Charger
• Front sight tool
• Plastic cleaning Rod
• Manual

*Acknowledgment:

Big Thanks!

Out of the Box chrono test:


Using stock battery(CM 8.4v 1400mAH 2/3A Ni-MH Battery) @.2g bbs

Real Wood Stock, Handgrip and Handguard:

Stock:


Handgrip:


Handguard:





Too Clean....
I don't like it

And the rest are metal:

Front Sight:


Yeah...this is what i want....scratch...wear out...


Rusty

Gas Port:


Front sling attachment:


Trigger side and reciever:



Front trunion, Rear Sight:



Izhmash marking without the serial number:


Rear Trunion and Stock Screw:



Butt plate and Battery compartment:

Removing the butt plate(cover) by taking out the two screw:

MechBox:

Taking out the Mechbox or disassembly procedure same as the Tokyo Marui AK-47, cm.42 almost 99% clone except the Butt plate removal.

Here's the Mechbox:


Metal bushing already


Motor with strong magnet:


Inside the Mechbox:


Strong spring same as SP125 with ordinary Spring guide:


XYT gears and tappet plate:


Cylinder, cylinder head and the nozzle:


Piston body and Piston Head:




Trigger Switch:

Seems good and can stand stronger spring but i don't care as I'm going to install it with a mosFET.

Enhancement:
(Minimal upgrade and tweak)

• Replacing only the spring guide:
  
  I got an spare systema ver3 spring guide.
  
• Cleaning and wiping out the yuckie grease
• Checking Cylinder head for airleak, Teflon wrap magic.
• Metal bushing seems good for 5k rounds or more.
• Re-shimming, some are loosely installed.
• Deans plug + directly soldered the fuse + MosFET installation = goodah!
  

Reassemble and Testing!

There's a problem with the stock hop up rubber,
Sometimes the bbs shot downward.
I still have a TM AK-47 complete set of Inner barrel with good hop up mech/rubber.
I just replaced it Instead buying new hop rubber (maybe after a couple of days).


And here's the result:

Using 11.1v/1800mAh/16C Lipo batt and .2g bbs.

S-I-M-P-L-Y B-E-A-U-T-I-F-U-L.
"You don't need stilettos and lipstick.
I'll marry you a million times"



To Conclude:

• A full metal, real wood, High fps, metal bushing stock setup, strong motor and ACM price (though a little bit higher here in Davao City).
  Rating: 10/10
  
• If you are a new airsoft player, plan to get this AK-47 and using it with stock setup.
  Rating: 9/10

Nice very nice , so when are you giong to weather it hmm

great review komrad

===========================

right after tomorrow's game komrad m76.

===========================

thanks komrad enforcer.

===========================

I will be waiting in an is e pa sion

komrad nagtataka ako bakit yang cm.042 na pinareview sayo eh black ang metal parts kasi yung cm.042s ko greyish ang metal parts nya tulad ng front sight at gas port.

Tama ka komrad, iba ang kulay sa 42S.

Wood first...
WET LOOK


Procedure here: Click1 or Click2

wrong angle, modified wood furni not clear

komrad kaya ba ng PB ang lipo or masisira talaga? hehe bibili ako ganyan, dalawa na .42 ko hehe.